SuperForm ICF Block System

• Fire Resistance: Up to 4-hour fire rating — and no flame path
• Energy Efficiency: Continuous insulation = lower HVAC loads; about 4X a typical 2x6” stud wall
• Seismic Strength: Built to exceed California's toughest codes
• Sound Dampening: Enjoy 50%+ noise reduction
• Long-Term Durability: No rot. No pests. Minimal maintenance
• Comfort: Better indoor air quality and consistent temperature
• Speed: Shrink build times. Fewer weather delays. Less framing crew required

If you're not using ICF yet, you're falling behind. SuperForm ICFs deliver faster installs, longer-lasting structures, and less jobsite stress — while giving your clients better energy savings for decades.

————————

Add a short callout box or bold subheading within the introductory content:

Made in the USA
While SuperForm is a Canadian company, all ICF blocks supplied by GBP are produced in Cincinnati, Ohio. That means proven international design combined with American manufacturing and faster lead times.

————————

“I’ve been building ICF houses between 25 and 30 years. This is one of the best technology inventions that has ever hit the building industry… I do have experience with 4 other brands of block and this is by far the strongest.”

~ Harvey Cook | Independent SuperForm ICF Installer

Some ICF systems require hacks and workarounds. SuperForm doesn't. It's engineered to solve real-world jobsite headaches before they happen.

• Stronger Interlock System: Precision-molded connections keep walls true and tight
• High-Tie Density: More fastening points for finishes and cladding
• 100% Virgin Polypropylene Ties: Engineered for superior strength and chemical resistance, these ties are independently tested to handle load-bearing forces with a tensile strength of up to 850 psi per tie. That means fewer failures, tighter walls, and long-term reliability you can trust on any jobsite. Superior screw retention and chemical resistance
• Red Tie Visibility: Easy inspection and faster quality checks
• T-Block Integration: Design intersections without field-cutting or weak spots — and because of its form-fit precision, it requires less bracing and is far less likely to suffer blowouts during concrete pours.
• Custom Block Range: 90°, 45°, End Bucks, Height Adjusters, Brick Ledges
• Made for Builders: Every inch is designed with install speed and accuracy in mind
• Real Builder Support: SuperForm provides hands-on training and project-level assistance

Why do builders and installers trust SuperForm ICF compared to other ICFs?

• Because SuperForm ICF is a stronger block that maximizes their time and budgets better than other ICFs, providing additional cost-savings to homeowners.

Learn more by downloading the SuperForm reference guide here:

https://www.greenbuilderproducts.com/wp-content/uploads/2025/09/SuperForm-Educating_Our_Builders_Our_Block.pdf

“When people ask me ‘Why SuperForm?‘ I can tell them out of our experience, from just pumping other block, we don’t have the success rate like we do with SuperForm.”
~ Brandon Elliott | Edgecon Concrete Pumping

What maximizes builders’ and installers’ time and budgets with SuperForm ICF?

• SuperForm’s ties hold less square footage of wall per unit
• SuperForm’s ICF block system is stronger, with more attachment points
• SuperForm’s ties have a higher tensile strength
• SuperForm’s ties withstand more lbs./inch when fastening

Why does this matter, and what product features make SuperForm ICF stronger?

• 12” Tall Block
  • SuperForm’s red plastic tie flanges hold less square footage of wall per unit = stronger wall
  • A stronger wall = flatter wall
• 6” Tie Spacing
  • More ties per block ensure the foam’s enhanced and fortified
  • More ‘studs’ = more places to attach to
• Virgin Material of the Tie
  • The tie’s red, virgin polypropylene material exceeds strengths of over 850 lbs. in SuperForm’s tensile tests.
  • The higher and more consistent tensile strength of the SuperForm tie handles the pressure of the concrete better.
• Thickest Tie Flange
  • SuperForm’s ties hold up to 330 lbs. off one 2-inch deck screw.
  • Ensures all wall attachments like kitchen cabinets and large flatscreen TVs will be secured, minimizing the feat of stripping screws.This system is built for pros who don’t want callbacks, delays, or guesswork. And yes — it works in everything from pool shells to 7-story apartment complexes.

• No Specialty Tools: Cut it, stack it, brace it. You're done.
• Faster Installs: Light enough to work longer, with fewer crew
• Less Waste: Pre-marked cut lines, no slop, no mess
• Jobsite Versatility: Works on basements, pools, mid-rise, retaining walls
• Labor Cost Savings: Finish faster and pass inspections the first time
• Engineer-Approved Layouts: No improvising necessary

Mini Rebar Advisory: SuperForm blocks are designed for traditional rebar reinforcement. However, GBP recommends talking to our ICF advisor before finalizing your structural plans. We support both standard rebar and Mini Rebar integration — and in some cases, a hybrid system delivers the best performance.

“I have a 100% trust-based relationship [with SuperForm]. they care about their installers and they treat us right. My day is made better knowing that I’m not going to have to lug around 200 lb. forms; Superform is light and I feel like I can di it until I’m 60 or 70.”

~ Logan Dejax | Revel Ventures

Download product specs, code compliance sheets, and layout guides here:

SuperForm Product Catalogue

(Contains precise block diagrams, dimensions, and layout visuals for each ICF block type.)

SuperForm Installation Manual

— 
(Includes reinforcement tables, wall heights, rebar schedules, and install tolerances.)

Fire Rating & Code Compliance

https://www.greenbuilderproducts.com/wp-content/uploads/2025/09/Superform-ICF-Code-Report-23062020-Final-09072020.pdf

California Title 24 Energy Notes — Summary below
(SuperForm ICF walls exceed California Title 24 requirements due to high R-values, minimal thermal bridging, and tight air sealing. The continuous EPS insulation and reduced HVAC load support lower energy usage and contribute to Net-Zero-ready designs.)

“SuperForm was extremely easy to work with and they met all our target dates. Our projects actually a month ahead of schedule.”

~ Jason Whitfield | Project Manager, Kanas Corporation]

Questions? Email [email protected] or schedule a consult with our ICF specialists.

See how SuperForm ICF performs in the real world — from small homes to massive multifamily developments.

Habitat for Humanity, Spokane, WA – Single-Family Home

A real-world demonstration of efficient, affordable ICF single-family home.

Built to Last: Why Hilton Chose SuperForm ICF

ICF used in a multi-story hospitality project, showcasing durability and energy performance.

Orion at Lumino Park - 2nd Runner Up - Multifamily - ICF Builder Awards 2022

A large-scale, mid-rise application that highlights speed, scalability, and fire resilience.